WSX-TEST

SM 1050, 1370, 1570 Linear Guideway Series Brochure

SM 1050+ Brochure

High Speed Tapping and Machining Centers Brochure

SM 1100, 1370, 1682, 2082, 2110 Box Way Series Brochure

SV Series Brochure

SMART SW 216 – BRIDGE TYPE – (CAT50, 6K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• BBT #50, Gear Type, 6,000 RPM, 35HP
  STANDARD
• Spindle Oil Cooler
  STANDARD
• 40 Tools ATC
  STANDARD
• Box Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with Water Cart
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Pilot Lamp
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 127 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• Z Axis Travel 42”
• Manual Angular Head (HF-M90L) 2000RPM
• HF-SU360L Semi-Automatic Universal Head 5 Degree 2500RPM
• HF-ME35L Manual Extension Head 350mmL 4000RPM
• HF-S90L Semi-Automatic 90 Degree Head 5 Degree Indexing 2000RPM
• Arm Seat for Head
• Renishaw Tools Probe TS-27R
• Renishaw Workpiece Probe RMP-60

SMART SM 1682-50 – BOX WAY – (CAT50, 6K)

• 290 PSI Coolant Thru-Spindle
  STANDARD
• Oil Skimmer
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Built-in Dual (Internal) Screw Conveyor
  STANDARD
• Coolant Bed Flush
  STANDARD
• Renishaw Probe Ready Kit (OMI-2T)
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Lift Up Chip Conveyor
• Air Thru Spindle
• Coolant/Air Gun
• BT50 Gripper
• DDS 12,000 RPM 25 HP
• Renishaw CAT40/50 OMP60 Spindle Probe - CAT40/50 Shank OMP60 + OMP60 Probe Kit (MOD TX/OPT-OFF)
• Renishaw OTS AA Optical Tool Setter
• Manual Guide i Training
• 3 Color Tower Light
• 60 ATC

SMART SM 1370-50 – BOX WAY – (CAT50, 6K)

• 290 PSI Coolant Thru-Spindle
  STANDARD
• Oil Skimmer
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Built-in Dual (Internal) Screw Conveyor
  STANDARD
• Coolant Bed Flush
  STANDARD
• Renishaw Probe Ready Kit (OMI-2T)
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Lift Up Chip Conveyor
• Air Thru Spindle
• Coolant/Air Gun
• BT50 Gripper
• DDS 12,000 RPM 25/20 HP (Factory Order)
• Renishaw CAT40/50 OMP60 Spindle Probe - CAT40/50 Shank OMP60 + OMP60 Probe Kit (MOD TX/OPT-OFF)
• Renishaw OTS AA Optical Tool Setter
• Manual Guide i Training
• 3 Color Tower Light
• 32 Tool ATC
• 40 Tool ATC

SMART NV 5500L – LINEAR WAY – (CAT40, 12K)

• 290 PSI Coolant Thru-Spindle
  STANDARD
• Oil Skimmer
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Renishaw Probe Ready Kit (OMI-2T)
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Lift Up Chip Conveyor
• Air Thru Spindle
• Coolant/Air Gun
• BT40 Gripper
• Renishaw CAT40/50 OMP60 Spindle Probe - CAT40/50 Shank OMP60 + OMP60 Probe Kit (MOD TX/OPT-OFF)
• Renishaw OTS AA Optical Tool Setter
• Manual Guide i Training

SMART KT 360D – LINEAR WAY – (BT30, 15K)

• Coolant Thru-Spindle Prep
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Top Cover
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD

• Machine Options

• Lift Up Chip Conveyor
• 290 PSI Thru Spindle
• Coolant/Air Gun
• Fanuc OiMF-P
• 21 Tools

SMART KM 430 – CROSS ROLLER WAY – (BT40, 12K)

• 12,000 rpm Spindle
  STANDARD
• 20 Tools Double Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD

• Machine Options

• High Speed Machining, 200 Look Ahead
• 290 PSI Thru Spindle (Factory Order)
• Fanuc OiMF-P

SMART KM 500 – CROSS ROLLER WAY – (BT30, 12K)

• 12,000 rpm Spindle
  STANDARD
• 20 Tools Double Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD

• Machine Options

• High Speed Machining, 200 Look Ahead
• 290 PSI Thru Spindle (Factory Order)
• Fanuc OiMF-P

SMART KT 420 – CROSS ROLLER WAY – (BT30, 15K)

• 15,000 rpm Spindle
  STANDARD
• 14 Tools Double Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD

• Machine Options

• High Speed Machining, 200 Look Ahead
• 290 PSI Thru Spindle (Factory Order)
• Fanuc OiMF-P

SMART KT 420A – CROSS ROLLER WAY – (BT30, 15K)

• 15,000 rpm Spindle
  STANDARD
• 20 Tools Twin Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD

• Machine Options

• High Speed Machining, 200 Look Ahead
• 290 PSI Thru Spindle (Factory Order)
• Fanuc OiMF-P
• 24,000 RPM, 25/5 HP
• 26 Tools

SMART KT 420L – CROSS ROLLER WAY – (BT30, 15K)

• 15,000 rpm Spindle
  STANDARD
• 14 Tools Double Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD

• Machine Options

• High Speed Machining, 200 Look Ahead
• 290 PSI Thru Spindle (Factory Order)
• Fanuc OiMF-P

SMART KT 420AL – CROSS ROLLER WAY – (BT30, 15K)

• 15,000 rpm Spindle
  STANDARD
• 20 Tools Twin Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD

• Machine Options

• High Speed Machining, 200 Look Ahead
• 290 PSI Thru Spindle (Factory Order)
• Fanuc OiMF-P
• 24,000 RPM, 25/5 HP
• 26 Tools

SMART KT 420DH – CROSS ROLLER WAY – (BT30, 15K)

• 20 x 2 Tools Double Arm ATC
  STANDARD
• Coolant Bed Flush
  STANDARD
• Coolant Gun
  STANDARD
• Rigid Tapping
  STANDARD
• Machine Work Light: Fluorescent Lamp
  STANDARD

• Machine Options

• High Speed Machining, 200 Look Ahead
• 290 PSI Thru Spindle (Factory Order)
• Fanuc OiMF-P

SMART KM 450DH – CROSS ROLLER WAY – (CAT40, 12K)

• 26 x 2 Tools Double Arm ATC
  STANDARD
• Coolant Bed Flush
  STANDARD
• Coolant Gun
  STANDARD
• Rigid Tapping
  STANDARD
• Machine Work Light: Fluorescent Lamp
  STANDARD

• Machine Options

• High Speed Machining, 200 Look Ahead
• 290 PSI Thru Spindle (Factory Order)
• Fanuc OiMF-P

SMART KT 500 – CROSS ROLLER WAY – (BT30, 15K)

• 15,000 rpm Spindle
  STANDARD
• 14 Tools Double Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD

• Machine Options

• High Speed Machining, 200 Look Ahead
• 290 PSI Thru Spindle (Factory Order)
• Fanuc OiMF-P

SMART KT 700 – CROSS ROLLER WAY – (BT30, 15K)

• 15,000 rpm Spindle
  STANDARD
• 14 Tools Double Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD

• Machine Options

• High Speed Machining, 200 Look Ahead
• 290 PSI Thru Spindle (Factory Order)
• Fanuc OiMF-P

SMART KM 450D – LINEAR WAY – (CAT40, 12K)

• Coolant Thru-Spindle Prep
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Top Cover
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD

• Machine Options

• Lift Up Chip Conveyor
• 290 PSI Thru Spindle
• Coolant/Air Gun
• Fanuc OIMF-P

SMART SM 1100-50 – BOX WAY – (CAT50, 6K)

• 290 PSI Coolant Thru-Spindle
  STANDARD
• Oil Skimmer
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Built-in Dual (Internal) Screw Conveyor
  STANDARD
• Coolant Bed Flush
  STANDARD
• Renishaw Probe Ready Kit (OMI-2T)
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Lift Up Chip Conveyor
• Air Thru Spindle
• Coolant/Air Gun
• BT50 Gripper
• DDS 12,000 RPM 25 HP
• Renishaw CAT40/50 OMP60 Spindle Probe - CAT40/50 Shank OMP60 + OMP60 Probe Kit (MOD TX/OPT-OFF)
• Renishaw OTS AA Optical Tool Setter
• Manual Guide i Training
• 3 Color Tower Light

SMART SM 1682-50 – BOX WAY – (CAT50, 10K)

• 290 PSI Coolant Thru-Spindle
  STANDARD
• Oil Skimmer
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Built-in Dual (Internal) Screw Conveyor
  STANDARD
• Coolant Bed Flush
  STANDARD
• Renishaw Probe Ready Kit (OMI-2T)
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Lift Up Chip Conveyor
• Air Thru Spindle
• Coolant/Air Gun
• BT50 Gripper
• DDS 12,000 RPM 25 HP
• Renishaw CAT40/50 OMP60 Spindle Probe - CAT40/50 Shank OMP60 + OMP60 Probe Kit (MOD TX/OPT-OFF)
• Renishaw OTS AA Optical Tool Setter
• Manual Guide i Training
• 3 Color Tower Light
• 60 ATC

SMART SM 2082-50 – BOX WAY – (CAT50, 6K)

• 290 PSI Coolant Thru-Spindle
  STANDARD
• Oil Skimmer
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Built-in Dual (Internal) Screw Conveyor
  STANDARD
• Coolant Bed Flush
  STANDARD
• Renishaw Probe Ready Kit (OMI-2T)
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Lift Up Chip Conveyor
• Air Thru Spindle
• Coolant/Air Gun
• BT50 Gripper
• DDS 12,000 RPM 25 HP
• Renishaw CAT40/50 OMP60 Spindle Probe - CAT40/50 Shank OMP60 + OMP60 Probe Kit (MOD TX/OPT-OFF)
• Renishaw OTS AA Optical Tool Setter
• Manual Guide i Training
• 3 Color Tower Light
• 60 ATC

SMART SM 2110-50 – BOX WAY – (CAT50, 6K)

• 290 PSI Coolant Thru-Spindle
  STANDARD
• Oil Skimmer
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Built-in Dual (Internal) Screw Conveyor
  STANDARD
• Coolant Bed Flush
  STANDARD
• Renishaw Probe Ready Kit (OMI-2T)
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Lift Up Chip Conveyor
• Air Thru Spindle
• Coolant/Air Gun
• BT50 Gripper
• DDS 12,000 RPM 25 HP
• Renishaw CAT40/50 OMP60 Spindle Probe - CAT40/50 Shank OMP60 + OMP60 Probe Kit (MOD TX/OPT-OFF)
• Renishaw OTS AA Optical Tool Setter
• Manual Guide i Training
• 3 Color Tower Light
• 60 ATC

HSA 2212 – BRIDGE TYPE – (CAT50, 6K/12K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• CAT #50, Gear Type, 6,000 RPM, 35HP
  STANDARD
• Spindle Oil Chiller HBO-750
  STANDARD
• ATC 40 Tools
  STANDARD
• Linear ROLLER Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with External Water Tank
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• AICC 2_200 Blocks
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 169.1 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• CTS 70 Bar (1000psi) with Water Cart (145.3 Gal)
• AICC 2 (_400 Blocks)
• Direct Drive Spindle 12000RPM_αiIT 22*26KW [34.87HP]
• Oil Skimmer
• Renishaw Tools Probe TS-27R
• Renishaw Workpiece Probe RMP 60
• Renishaw CAT40/50 OMP60 spindle probe CAT40/50 Shank OMP60 + OMP60 probe kit (MOD TX/OPT-OFF)
• Renishaw OTS AA optical tool setter
• Manual 90 Degree Head HF-M90L 2000RPM
• Manual Universal Head HF-MU360L 2500RPM
• Swivel Arm
• ATC 60 Tools (from 40 Tools Upgrade 60 Tools)
• Data Server 1GB

HSA 3212 – BRIDGE TYPE – (CAT50, 6K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• CAT #50, Gear Type, 6,000 RPM, 35HP
  STANDARD
• Spindle Oil Chiller HBO-750
  STANDARD
• ATC 40 Tools
  STANDARD
• Linear ROLLER Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with External Water Tank
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• AICC 2_200 Blocks
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 169.1 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• CTS 70 Bar (1000psi) with Water Cart (145.3 Gal)
• AICC 2 (_400 Blocks)
• Direct Drive Spindle 12000RPM_αiIT 22*26KW [34.87HP]
• Oil Skimmer
• Renishaw Tools Probe TS-27R
• Renishaw Workpiece Probe RMP 60
• Renishaw CAT40/50 OMP60 spindle probe CAT40/50 Shank OMP60 + OMP60 probe kit (MOD TX/OPT-OFF)
• Renishaw OTS AA optical tool setter
• Manual 90 Degree Head HF-M90L 2000RPM
• Manual Universal Head HF-MU360L 2500RPM
• Swivel Arm
• ATC 60 Tools (from 40 Tools Upgrade 60 Tools)
• Data Server 1GB

HSA 2212 – BRIDGE TYPE – (CAT40, 12K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• CAT #40, Gear Type, 12,000 RPM, 25HP
  STANDARD
• Spindle Oil Chiller HBO-750
  STANDARD
• ATC 40 Tools
  STANDARD
• Linear ROLLER Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with External Water Tank
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• AICC 2_200 Blocks
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 169.1 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• CTS 70 Bar (1000psi) with Water Cart (145.3 Gal)
• AICC 2 (_400 Blocks)
• Oil Skimmer
• Renishaw Tools Probe TS-27R
• Renishaw Workpiece Probe RMP 60
• Renishaw OTS AA optical tool setter
• Renishaw OTS AA optical tool setter
• Manual 90 Degree Head HF-M90L 2000RPM
• Manual Universal Head HF-MU360L 2500RPM
• Swivel Arm
• ATC 60 Tools (from 40 Tools Upgrade 60 Tools)
• Data Server 1GB

HSA 320EAY – 5-SIDED BRIDGE TYPE – (CAT50, 6K/10K)

• Fanuc 31iMB Control_10.4” LCD
  STANDARD
• CAT #50, Gear Type, 6,000 RPM, 34.8HP, Spindle oil cooler
  STANDARD
• ATC 40 Tools (Vertical tool change type)
  STANDARD
• Linear ROLLER guide way on 3 axes
  STANDARD
• Automatic universal head HF-AU360H, 1degree indexing, 4000rpm (CTS)
  STANDARD
• Automatic arm type swivel bracket for HF-AU360
  STANDARD
• Coolant Through Spindle 290psi (20bar) with water cart
  STANDARD
• Link type chip conveyor + bucket
  STANDARD

• Machine Options

• Tool ARM Type Tool Magazine_90 pcs
• Tool ARM Type Tool Magazine (Vertical/Horizontal)_62 pcs
• Gear Spindle 6000RPM
• Coolant Through Spindle_70BAR (1015.24PSI) With Secondary Tank
• Automatic Mutiangular Milling Head_HF-AU360H, 1deg./div., 4000RPM, CTS
• Automatic Mutiangular Milling Head_HF-AU360H, 2.5deg./div., 4000RPM, CTS
• Automatic Extend Head_HF-AE50L*4000RPM, 500mmL (19.69"L)
• Automatic Extend Head_HF-AE35L*4000RPM, 350mmL (13.78"L)
• Automatic Angular Head (HF-A90H) 1deg./div., 4000RPM, CTS
• Automatic Angular Head (HF-A90H) 2.5deg./div., 4000RPM, CTS
• Auto Rotary ARM Seat of Angular Head for HF-A90
• Auto Rotary ARM Seat of Angular Head for HF-AU360
• Auto Rotary ARM Seat of Angular Head for HF-AR90
• TS-27R Intelligent Tool Setter (Touch Probe + Tool Database + Alarm Report System + Intelligent Tool Sort)
• Workpiece Measure Probe (Renishaw RMP60)

HSA 420EAY – 5-SIDED BRIDGE TYPE – (CAT50, 6K/10K)

• Fanuc 31iMB Control_10.4” LCD
  STANDARD
• CAT #50, Gear Type, 6,000 RPM, 34.8HP, Spindle oil cooler
  STANDARD
• ATC 40 Tools (Vertical tool change type)
  STANDARD
• Linear ROLLER guide way on 3 axes
  STANDARD
• Automatic universal head HF-AU360H, 1degree indexing, 4000rpm (CTS)
  STANDARD
• Automatic arm type swivel bracket for HF-AU360
  STANDARD
• Coolant Through Spindle 290psi (20bar) with water cart
  STANDARD
• Link type chip conveyor + bucket
  STANDARD

• Machine Options

• Tool ARM Type Tool Magazine_90 pcs
• Tool ARM Type Tool Magazine (Vertical/Horizontal)_62 pcs
• Gear Spindle 6000RPM
• Coolant Through Spindle_70BAR (1015.24PSI) With Secondary Tank
• Automatic Mutiangular Milling Head_HF-AU360H, 1deg./div., 4000RPM, CTS
• Automatic Mutiangular Milling Head_HF-AU360H, 2.5deg./div., 4000RPM, CTS
• Automatic Extend Head_HF-AE50L*4000RPM, 500mmL (19.69"L)
• Automatic Extend Head_HF-AE35L*4000RPM, 350mmL (13.78"L)
• Automatic Angular Head (HF-A90H) 1deg./div., 4000RPM, CTS
• Automatic Angular Head (HF-A90H) 2.5deg./div., 4000RPM, CTS
• Auto Rotary ARM Seat of Angular Head for HF-A90
• Auto Rotary ARM Seat of Angular Head for HF-AU360
• Auto Rotary ARM Seat of Angular Head for HF-AR90
• TS-27R Intelligent Tool Setter (Touch Probe + Tool Database + Alarm Report System + Intelligent Tool Sort)
• Workpiece Measure Probe (Renishaw RMP60)

HSA 327EAY – 5-SIDED BRIDGE TYPE – (CAT50, 6K/10K)

• Fanuc 31iMB Control_10.4” LCD
  STANDARD
• CAT #50, Gear Type, 6,000 RPM, 34.8HP, Spindle oil cooler
  STANDARD
• ATC 40 Tools (Vertical tool change type)
  STANDARD
• Linear ROLLER guide way on 3 axes
  STANDARD
• Automatic universal head HF-AU360H, 1degree indexing, 4000rpm (CTS)
  STANDARD
• Automatic arm type swivel bracket for HF-AU360
  STANDARD
• Coolant Through Spindle 290psi (20bar) with water cart
  STANDARD
• Link type chip conveyor + bucket
  STANDARD

• Machine Options

• Tool ARM Type Tool Magazine_90 pcs
• Tool ARM Type Tool Magazine (Vertical/Horizontal)_62 pcs
• Gear Spindle 6000RPM
• Coolant Through Spindle_70BAR (1015.24PSI) With Secondary Tank
• Automatic Mutiangular Milling Head_HF-AU360H, 1deg./div., 4000RPM, CTS
• Automatic Mutiangular Milling Head_HF-AU360H, 2.5deg./div., 4000RPM, CTS
• Automatic Extend Head_HF-AE50L*4000RPM, 500mmL (19.69"L)
• Automatic Extend Head_HF-AE35L*4000RPM, 350mmL (13.78"L)
• Automatic Angular Head (HF-A90H) 1deg./div., 4000RPM, CTS
• Automatic Angular Head (HF-A90H) 2.5deg./div., 4000RPM, CTS
• Auto Rotary ARM Seat of Angular Head for HF-A90
• Auto Rotary ARM Seat of Angular Head for HF-AU360
• Auto Rotary ARM Seat of Angular Head for HF-AR90
• TS-27R Intelligent Tool Setter (Touch Probe + Tool Database + Alarm Report System + Intelligent Tool Sort)
• Workpiece Measure Probe (Renishaw RMP60)

HSA 427EAY – 5-SIDED BRIDGE TYPE – (CAT50, 6K/10K)

• Fanuc 31iMB Control_10.4” LCD
  STANDARD
• CAT #50, Gear Type, 6,000 RPM, 34.8HP, Spindle oil cooler
  STANDARD
• ATC 40 Tools (Vertical tool change type)
  STANDARD
• Linear ROLLER guide way on 3 axes
  STANDARD
• Automatic universal head HF-AU360H, 1degree indexing, 4000rpm (CTS)
  STANDARD
• Automatic arm type swivel bracket for HF-AU360
  STANDARD
• Coolant Through Spindle 290psi (20bar) with water cart
  STANDARD
• Link type chip conveyor + bucket
  STANDARD

• Machine Options

• Tool ARM Type Tool Magazine_90 pcs
• Tool ARM Type Tool Magazine (Vertical/Horizontal)_62 pcs
• Gear Spindle 6000RPM
• Coolant Through Spindle_70BAR (1015.24PSI) With Secondary Tank
• Automatic Mutiangular Milling Head_HF-AU360H, 1deg./div., 4000RPM, CTS
• Automatic Mutiangular Milling Head_HF-AU360H, 2.5deg./div., 4000RPM, CTS
• Automatic Extend Head_HF-AE50L*4000RPM, 500mmL (19.69"L)
• Automatic Extend Head_HF-AE35L*4000RPM, 350mmL (13.78"L)
• Automatic Angular Head (HF-A90H) 1deg./div., 4000RPM, CTS
• Automatic Angular Head (HF-A90H) 2.5deg./div., 4000RPM, CTS
• Auto Rotary ARM Seat of Angular Head for HF-A90
• Auto Rotary ARM Seat of Angular Head for HF-AU360
• Auto Rotary ARM Seat of Angular Head for HF-AR90
• TS-27R Intelligent Tool Setter (Touch Probe + Tool Database + Alarm Report System + Intelligent Tool Sort)
• Workpiece Measure Probe (Renishaw RMP60)

HSA 423 – BRIDGE TYPE – (CAT50, 6K/12K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• CAT #50, Gear Type, 6,000 RPM, 34.87HP
  STANDARD
• Spindle Oil Chiller HBO-750
  STANDARD
• ATC 40 Tools
  STANDARD
• Linear ROLLER Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with External Water Tank
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• AICC 2_200 Blocks
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 169.1 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• CTS 70 Bar (1000psi) with Water Cart (145.3 Gal)
• AICC 2 (_400 Blocks)
• Direct Drive Spindle 12000RPM_αiIT 22*26KW [34.87HP]
• Oil Skimmer
• Renishaw Tools Probe TS-27R
• Renishaw Workpiece Probe RMP 60
• Manual 90 Degree Head HF-M90L 2000RPM
• Manual Universal Head HF-MU360L 2500RPM
• Swivel Arm
• ATC 60 Tools (from 40 Tools Upgrade 60 Tools)
• Data Server 1GB

HSA 523 – BRIDGE TYPE – (CAT50, 6K/12K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• CAT #50, Gear Type, 6,000 RPM, 34.87HP
  STANDARD
• Spindle Oil Chiller HBO-750
  STANDARD
• ATC 40 Tools
  STANDARD
• Linear ROLLER Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with External Water Tank
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• AICC 2_200 Blocks
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 169.1 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• CTS 70 Bar (1000psi) with Water Cart (145.3 Gal)
• AICC 2 (_400 Blocks)
• Direct Drive Spindle 12000RPM_αiIT 22*26KW [34.87HP]
• Oil Skimmer
• Renishaw Tools Probe TS-27R
• Renishaw Workpiece Probe RMP 60
• Manual 90 Degree Head HF-M90L 2000RPM
• Manual Universal Head HF-MU360L 2500RPM
• Swivel Arm
• ATC 60 Tools (from 40 Tools Upgrade 60 Tools)
• Data Server 1GB

HSA 323 – BRIDGE TYPE – (CAT50, 6K/12K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• CAT #50, Gear Type, 6,000 RPM, 34.87HP
  STANDARD
• Spindle Oil Chiller HBO-750
  STANDARD
• ATC 40 Tools
  STANDARD
• Linear ROLLER Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with External Water Tank
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• AICC 2_200 Blocks
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 169.1 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• CTS 70 Bar (1000psi) with Water Cart (145.3 Gal)
• AICC 2 (_400 Blocks)
• Direct Drive Spindle 12000RPM_αiIT 22*26KW [34.87HP]
• Oil Skimmer
• Renishaw Tools Probe TS-27R
• Renishaw Workpiece Probe RMP 60
• Renishaw CAT40/50 OMP60 spindle probe CAT40/50 Shank OMP60 + OMP60 probe kit (MOD TX/OPT-OFF)
• Renishaw OTS AA optical tool setter
• Manual 90 Degree Head HF-M90L 2000RPM
• Manual Universal Head HF-MU360L 2500RPM
• Swivel Arm
• ATC 60 Tools (from 40 Tools Upgrade 60 Tools)
• Data Server 1GB

SW 316 – BRIDGE TYPE – (CAT50, 6K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• BBT #50, Gear Type, 6,000 RPM, 35HP
  STANDARD
• Spindle Oil Cooler
  STANDARD
• 40 Tools ATC
  STANDARD
• Box Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with Water Cart
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Pilot Lamp
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 127 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• Z Axis Travel 42”
• Manual Angular Head (HF-M90L) 2000RPM
• HF-SU360L Semi-Automatic Universal Head 5 Degree 2500RPM
• HF-ME35L Manual Extension Head 350mmL 4000RPM
• HF-S90L Semi-Automatic 90 Degree Head 5 Degree Indexing 2000RPM
• Arm Seat for Head
• Renishaw Tools Probe TS-27R
• Renishaw Workpiece Probe RMP-60

SW 323 – BRIDGE TYPE – (CAT50, 6K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• BBT #50, Gear Type, 6,000 RPM, 35HP
  STANDARD
• Spindle Oil Cooler
  STANDARD
• 40 Tools ATC
  STANDARD
• Box Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with Water Cart
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Pilot Lamp
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 127 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• Z Axis Travel 42”
• Manual Angular Head (HF-M90L) 2000RPM
• HF-SU360L Semi-Automatic Universal Head 5 Degree 2500RPM
• HF-ME35L Manual Extension Head 350mmL 4000RPM
• HF-S90L Semi-Automatic 90 Degree Head 5 Degree Indexing 2000RPM
• Arm Seat for Head
• Renishaw Tools Probe TS-27R
• Renishaw Workpiece Probe RMP-60

SW 423 – BRIDGE TYPE – (CAT50, 6K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• BBT #50, Gear Type, 6,000 RPM, 35HP
  STANDARD
• Spindle Oil Cooler
  STANDARD
• 40 Tools ATC
  STANDARD
• Box Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with Water Cart
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Pilot Lamp
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 127 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• Z Axis Travel 42”
• Manual Angular Head (HF-M90L) 2000RPM
• HF-SU360L Semi-Automatic Universal Head 5 Degree 2500RPM
• HF-ME35L Manual Extension Head 350mmL 4000RPM
• HF-S90L Semi-Automatic 90 Degree Head 5 Degree Indexing 2000RPM
• Arm Seat for Head
• Renishaw Tools Probe OS-27R
• Renishaw Workpiece Probe OMP-60

SW 523 – BRIDGE TYPE – (CAT50, 6K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• BBT #50, Gear Type, 6,000 RPM, 35HP
  STANDARD
• Spindle Oil Cooler
  STANDARD
• 40 Tools ATC
  STANDARD
• Box Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with Water Cart
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Pilot Lamp
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 127 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• Z Axis Travel 42”
• Manual Angular Head (HF-M90L) 2000RPM
• HF-SU360L Semi-Automatic Universal Head 5 Degree 2500RPM
• HF-ME35L Manual Extension Head 350mmL 4000RPM
• HF-S90L Semi-Automatic 90 Degree Head 5 Degree Indexing 2000RPM
• Arm Seat for Head
• Renishaw Tools Probe TS-27R
• Renishaw Workpiece Probe RMP-60

SW 623 – BRIDGE TYPE – (CAT50, 6K)

• Fanuc 0iMF Control_10.4” LCD
  STANDARD
• BBT #50, Gear Type, 6,000 RPM, 35HP
  STANDARD
• Spindle Oil Cooler
  STANDARD
• 40 Tools ATC
  STANDARD
• Box Guide Way on 3 Axes
  STANDARD
• CTS 290 PSI with Water Cart
  STANDARD
• Link Type Chip Conveyor + Bucket
  STANDARD
• Full Splash Guard
  STANDARD
• Operation Manual
  STANDARD
• Coolant System
  STANDARD
• Spindle Air Blast System
  STANDARD
• Leveling Bolts and Blocks
  STANDARD
• Ethernet Connection Interface
  STANDARD
• 3-Axis ABS Encoder
  STANDARD
• Pilot Lamp
  STANDARD
• Two Chip Augers
  STANDARD
• Work Lamp
  STANDARD
• Automatic Central Lubrication System
  STANDARD
• Heat Exchanger for Electrical Cabinet
  STANDARD
• 127 Gallons Coolant Tank with Coolant Pump
  STANDARD

• Machine Options

• Z Axis Travel 42”
• Manual Angular Head (HF-M90L) 2000RPM
• HF-SU360L Semi-Automatic Universal Head 5 Degree 2500RPM
• HF-ME35L Manual Extension Head 350mmL 4000RPM
• HF-S90L Semi-Automatic 90 Degree Head 5 Degree Indexing 2000RPM
• Arm Seat for Head
• Renishaw Tools Probe TS-27R
• Renishaw Workpiece Probe RMP-60

Kenichi Compact B

Kenichi Focus 5

Kenichi Linmax B

Kenichi Overview

HNK R Series

HNK NT & VTC Series

HNK KTM

HNK HPM

HNK HGH-HGG

HNK HL Series

HNK HFB Series

HNK HFB FLYER

HNK HB Series

HNK General

SXKH

SMART NL 2500/750 – BOX WAY – (10″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Milling/Live Tool Turret
• Chip Conveyor - Side Discharge
• Auto Part Catcher (retrofitable)
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 3 Set of Hard Jaws
• 1 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1")
• U-Drill Tool Holder (2")

• Sleeves

• Boring Bar Sleeve Set 2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 2500SY – BOX WAY – (10″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD
• Air Blow for Main Spindle
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• Auto Part Catcher
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1")
• U-Drill Tool Holder (2")
• X-Axis Live Tool Holder ER-25 (non-coolant thru)
• Z-Axis Live Tool Holder ER-25 (non-coolant thru)
• O.D. Holder (1”)
• Double O.D. Holder (main/sub)
• Double O.D. Holder (1/2 index)

• Sleeves

• Boring Bar Sleeve Set 2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART SX 4000

• Machine Options

• Contact Your Distributor for Options.

SMART NL 6000M – BOX WAY – (24″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #6
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• Hydraulic Steady Rest Preparation Kit
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (3”)
• Boring Bar Holder (3”)
• O.D. Holder (1-1/4”)
• X-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• Z-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)

• Sleeves

• Boring Bar Sleeve Set 3”x(5/8”,3/4”,1”,1-1/4”,1-1/2”,2”,2-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 6000XLM – BOX WAY – (24″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #6
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• Hydraulic Steady Rest Preparation Kit
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (3”)
• X-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• Z-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• Boring Bar Holder (3”)
• O.D. Holder (1-1/4”)

• Sleeves

• Boring Bar Sleeve Set 3”x(5/8”,3/4”,1”,1-1/4”,1-1/2”,2”,2-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 6000XXLM – BOX WAY – (24″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #6
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• Hydraulic Steady Rest Preparation Kit
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (3”)
• X-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• Z-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• Boring Bar Holder (3”)
• O.D. Holder (1-1/4”)

• Sleeves

• Boring Bar Sleeve Set 3”x(5/8”,3/4”,1”,1-1/4”,1-1/2”,2”,2-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 6000CXLM – BOX WAY – (24″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #6
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• Hydraulic Steady Rest Preparation Kit
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training

• Holders

• X-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• Z-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• X-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• Z-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (3”)
• Boring Bar Holder (3”)
• O.D. Holder (1")

• Sleeves

• Boring Bar Sleeve Set 3”x(5/8”,3/4”,1”,1-1/4”,1-1/2”,2”,2-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 6000LM – BOX WAY – (24″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #6
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• Hydraulic Steady Rest Preparation Kit

• Holders

• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (3”)
• Boring Bar Holder (3”)
• O.D. Holder (1-1/4”)
• X-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• Z-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)

• Sleeves

• Boring Bar Sleeve Set 3”x(5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”,2",2-1/2")

• Back Plate

• Block, Clamp & Wedge

SMART NL 6000CLM – BOX WAY – (24″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #6
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• Hydraulic Steady Rest Preparation Kit

• Holders

• X-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• Z-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• X-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• Z-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (3”)
• Boring Bar Holder (3”)
• O.D. Holder (1")

• Sleeves

• Boring Bar Sleeve Set 3”x(5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”,2",2-1/2")

• Back Plate

• Block, Clamp & Wedge

SMART NL 6000CM – BOX WAY – (24″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #6
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• Hydraulic Steady Rest Preparation Kit

• Holders

• Face Tool Holder (1-1/4”)
• Boring Bar Holder (3”)
• O.D. Holder (1")
• U-Drill Tool Holder (3")

• Sleeves

• Boring Bar Sleeve Set 3”x (5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”,2",2-1/2")

• Back Plate

• Block, Clamp & Wedge

SMART NL 6000SM – BOX WAY – (24″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Built-in Tailstock Bearings MT #6
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• Hydraulic Steady Rest Preparation Kit
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (3”)
• Boring Bar Holder (3”)
• X-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• Z-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• X-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• Z-Axis Live Tool Holder BMT85, ER-50 (non-coolant thru)
• O.D. Holder (1")

• Sleeves

• Boring Bar Sleeve Set 3”x(5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”,2",2-1/2")

• Back Plate

• Block, Clamp & Wedge

SMART NX 7000

• Tool Change System with 64 Tool Capacity
  STANDARD
• Flood Coolant System
  STANDARD
• Spindle Cooling Unit
  STANDARD
• Air Blast Chip Purging of the Spindle Taper
  STANDARD
• Dual Auger Inside Chip Conveyors
  STANDARD
• Outside Chip Conveyor (standard lift-up/link belt style)
  STANDARD

• Machine Options

• Expanded Capacity Automatic Tool Change System - Upcharge 88 Chain type ATC
• Expanded Capacity Automatic Tool Change System - Upcharge 126 Chain type ATC
• Additional Pallet
• Coolant Thru Spindle 870 PSI
• Overhead Shower Coolant System
• Chip Blaster Model JV40 (1000 PSI System)
• Chip Blaster Mist Blaster Mist Collection with HEPA Filter
• Conveyor with Mesh Hinge Belt, Scraper, Turbo Microfine 2
• Conveyor with Magnetic Plate for Filtration System Turbo

SMART NX 5000

• Tool Change System with 60 Tool Capacity
  STANDARD
• Flood Coolant System
  STANDARD
• Spindle Cooling Unit
  STANDARD
• Air Blast Chip Purging of the Spindle Taper
  STANDARD
• Dual Auger Inside Chip Conveyors
  STANDARD
• Outside Chip Conveyor (standard lift-up/link belt style)
  STANDARD

• Machine Options

• Additional Pallet
• Coolant Thru Spindle 870 PSI
• Overhead Shower Coolant System
• Chip Blaster Model JV40 (1000 PSI System)
• Chip Blaster Mist Blaster Mist Collection with HEPA Filter
• Conveyor with Mesh Hinge Belt, Scraper, Turbo Microfine 2
• Conveyor with Magnetic Plate for Filtration System Turbo

SMART NL 6000XL – BOX WAY – (24″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #6
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Milling/Live Tool Turret
• Chip Conveyor - Side Discharge
• Hydraulic Steady Rest Preparation Kit
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (3”)
• Boring Bar Holder (3”)
• O.D. Holder (1-1/4”)

• Sleeves

• Boring Bar Sleeve Set 3”x(5/8”,3/4”,1”,1-1/4”,1-1/2”,2”,2-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 2000 – BOX WAY – (8″ CHUCK)

• Tool Presetter
  STANDARD
• Oil SKimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• Auto Parts Catcher
  STANDARD
• 140 PSI Coolant Pump
  STANDARD

• Machine Options

• Milling/Live Tool Turret
• Chip Conveyor - Side Discharge
• Auto Door Single - Door Open with Safety Release (retrofitable) (10 Weeks Delivery)
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1”)
• U-Drill Tool Holder (2”)
• Boring Bar Holder (2")

• Sleeves

• Boring Bar Sleeve Set 2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 1500M – BOX WAY – (6″ CHUCK)

• Tool Presetter
  STANDARD
• Oil SKimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• Auto Parts Catcher
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD
• 140 PSI Coolant Pump
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• Auto Door Single - Door Open with Safety Release (retrofitable) (10 Weeks Delivery)
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1”)
• U-Drill Tool Holder (2”)
• Boring Bar Holder (2")
• X-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• Z-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• O.D. Holder (1")

• Sleeves

• Boring Bar Sleeve Set 1.5”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 1500 – BOX WAY – (6″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• Auto Parts Catcher
  STANDARD
• 140 PSI Coolant Pump
  STANDARD

• Machine Options

• Milling/Live Tool Turret
• Chip Conveyor - Side Discharge
• Auto Door Single - Door Open with Safety Release (retrofitable) (10 Weeks Delivery)
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1”)
• U-Drill Tool Holder (2”)
• Boring Bar Holder (2")

• Sleeves

• Boring Bar Sleeve Set 1.5”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 2000BM – BOX WAY – (10″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• Auto Parts Catcher
  STANDARD
• (1) X - Axis Live Tool Holder
  STANDARD
• (1) Z - Axis Live Tool Holder
  STANDARD
• 140 PSI Coolant Pump
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• Auto Door Single - Door Open with Safety Release (retrofittable)
• 1 Set of Hard Jaws
• 3 Sets of Soft Jaws
• 3 Color Tower Light
• 3 Color Tower Light

• Holders

• Face Tool Holder (1”)
• U-Drill Tool Holder (2”)
• Boring Bar Holder (2")
• X-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• Z-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• O.D. Holder (1")

• Sleeves

• Boring Bar Sleeve Set 1.5”x (3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 150 – BOX WAY – (6″ CHUCK)

• Programmable Tailstock (Body & Quill)
  STANDARD
• Barfeeder Interface
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light
• Parts Catcher
• Tool Setter
• Oil Skimmer

• Holders

• Face Tool Holder (1”)
• U-Drill Tool Holder (2”)
• Boring Bar Holder (2”)

• Sleeves

• Boring Bar Sleeve Set 1.5”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 2000BSY – BOX WAY – (8″ CHUCK)

• Tool Presetter
  STANDARD
• Oil SKimmer
  STANDARD
• Barfeeder Interface
  STANDARD
• Air Blow for Main Spindle
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD
• Pneumatic Parts Ejector
  STANDARD
• Sub Spindle Coolant Flush
  STANDARD
• 290 PSI Coolant Pump
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• Internal Parts Catcher / Parts Conveyor
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Hard Jaws
• 3 Color Tower Light

• Holders

• X-Axis Live Tool Holder ER-25 (non-coolant thru)
• Z-Axis Live Tool Holder ER-25 (non-coolant thru)
• Face Tool Holder (1”)
• O.D. Holder (1”)
• U-Drill Tool Holder (1-1/2”)
• Boring Bar Holder (1-1/2")

• Sleeves

• Boring Bar Sleeve Set 1-1/2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 5000LY – BOX WAY – (21″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Barfeeder Interface
  STANDARD
• Air Blow for Main Spindle
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• Hydraulic Steady Rest Preparation Kit

• Holders

• X-Axis Live Tool Holder BMT75, ER-32 (non-coolant thru)
• Z-Axis Live Tool Holder BMT75, ER-32 (non-coolant thru)
• Face Tool Holder (1-1/4”)
• O.D. Holder (1-1/4”)
• U-Drill Tool Holder (2-1/2”)

• Sleeves

• Boring Bar Sleeve Set 2-1/2”x(1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2", 2"))

• Back Plate

• Block, Clamp & Wedge

SMART NL 4000LY – BOX WAY – (18″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Barfeeder Interface
  STANDARD
• Air Blow for Main Spindle
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• Hydraulic Steady Rest Preparation Kit

• Holders

• X-Axis Live Tool Holder BMT75, ER-32 (non-coolant thru)
• Z-Axis Live Tool Holder BMT75, ER-32 (non-coolant thru)
• Face Tool Holder (1-1/4”)
• O.D. Holder (1-1/4”)
• U-Drill Tool Holder (2-1/2”)

• Sleeves

• Boring Bar Sleeve Set 2-1/2”x(1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2", 2"))

• Back Plate

• Block, Clamp & Wedge

SMART NL 3500BY – BOX WAY – (15″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Barfeeder Interface
  STANDARD
• Air Blow for Main Spindle
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• Hydraulic Steady Rest Preparation Kit

• Holders

• X-Axis Live Tool Holder BMT75, ER-32 (non-coolant thru)
• Z-Axis Live Tool Holder BMT75, ER-32 (non-coolant thru)
• Face Tool Holder (1-1/4”)
• O.D. Holder (1-1/4”)
• U-Drill Tool Holder (2-1/2”)

• Sleeves

• Boring Bar Sleeve Set 2-1/2”x(1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2", 2"))

• Back Plate

• Block, Clamp & Wedge

SMART NL 2000ASY – BOX WAY – (6″ CHUCK)

• Tool Presetter
  STANDARD
• Oil SKimmer
  STANDARD
• Barfeeder Interface
  STANDARD
• Air Blow for Main Spindle
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD
• Pneumatic Parts Ejector
  STANDARD
• Sub Spindle Coolant Flush
  STANDARD
• 290 PSI Coolant Pump
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• Internal Parts Catcher / Parts Conveyor
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Hard Jaws
• 3 Color Tower Light

• Holders

• X-Axis Live Tool Holder ER-25 (non-coolant thru)
• Z-Axis Live Tool Holder ER-25 (non-coolant thru)
• Face Tool Holder (1”)
• O.D. Holder (1”)
• U-Drill Tool Holder (1-1/2”)
• Boring Bar Holder (1-1/2")

• Sleeves

• Boring Bar Sleeve Set 1-1/2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 2000M – BOX WAY – (8″ CHUCK)

• Tool Presetter
  STANDARD
• Oil SKimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• Auto Parts Catcher
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD
• 140 PSI Coolant Pump
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• Auto Door Single - Door Open with Safety Release (retrofitable) (10 Weeks Delivery)
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• X-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• Z-Axis Live Tool Holder BMT55, ER-25 (non-coolant thru)
• Face Tool Holder (1”)
• U-Drill Tool Holder (1.5”)
• O.D. Holder (1”)
• Boring Bar Holder (1.5”)

• Sleeves

• Boring Bar Sleeve Set 2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”)

• Back Plate

• Block, Clamp & Wedge

SMART SM30-2500

SMART SV 2 – LINEAR WAY – (CAT40, 12K)

• 12,000 rpm Spindle
  STANDARD
• 30 Tools Double Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD
• Lift Up Conveyor
  STANDARD
• Oil Cooler
  STANDARD

• Machine Options

• 290 PSI Coolant Thru Spindle
• Renishaw Receiver and GUI Software
• Renishaw Probe and Tool Setter (when purchased with machine)
• CTS Preparation
• 4 Axis Preparation
• High Speed Machining, 200 Look Ahead
• Coolant/Air Gun

SMART SV 1 – LINEAR WAY – (CAT40, 8K)

• 8,000 rpm Spindle
  STANDARD
• 24 Tools Double Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Rear Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD
• High Speed Machining, 200 Look Ahead
  STANDARD

• Machine Options

• 290 PSI Coolant Thru Spindle
• 10,000 RPM with Spindle Oil Coolant
• Auger for Chip Removal

SMART SV 4 – LINEAR WAY – (CAT40, 12K)

• 30 Tools Double Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD
• Lift Up Conveyor (Scraper Type)
  STANDARD

• Machine Options

• 290 PSI Coolant Thru Spindle
• Renishaw Receiver and GUI Software
• Renishaw Probe and Tool Setter (when purchased with machine)
• CTS Preparation
• 4 Axis Preparation
• High Speed Machining, 200 Look Ahead
• Coolant/Air Gun

SMART SV 3 – LINEAR WAY – (CAT40, 12K)

• 30 Tools Double Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD
• Lift Up Conveyor
  STANDARD

• Machine Options

• 290 PSI Coolant Thru Spindle
• Renishaw Receiver and GUI Software
• Renishaw Probe and Tool Setter (when purchased with machine)
• CTS Preparation
• 4 Axis Preparation
• High Speed Machining, 200 Look Ahead
• Coolant/Air Gun

SMART SV 5 – LINEAR WAY – (CAT40, 12K)

• 12,000 rpm Spindle
  STANDARD
• 30 Tools Double Arm ATC
  STANDARD
• Full Enclosed Splash Guard
  STANDARD
• Coolant Bed Flush
  STANDARD
• Rigid Tapping
  STANDARD
• Big Plus Spindle
  STANDARD
• Manual Guide i
  STANDARD
• Highspeed Machining, 200 Look Ahead
  STANDARD
• Lift Up Conveyor
  STANDARD

• Machine Options

• Renishaw Probe and Tool Setter (when purchased with machine)
• 290 PSI Coolant Thru Spindle

SMART SM30-4500

SMART SM30-6500

SMART NL 2500M/750 – BOX WAY – (10″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• Auto Part Catcher (Retrofitable)
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• X-Axis Live Tool Holder BMT65, ER-32 (non-coolant thru)
• Z-Axis Live Tool Holder BMT65, ER-32 (non-coolant thru)
• Face Tool Holder (1")
• O.D. Holder (1”)
• U-Drill Tool Holder (2")
• Boring Bar Holder (2”)

• Sleeves

• Boring Bar Sleeve Set 2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 3000BLM – BOX WAY – (12″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #4
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 3 Set of Hard Jaws
• 1 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1")
• U-Drill Tool Holder (2")
• X-Axis Live Tool Holder BMT65, ER-32 (non-coolant thru)
• Z-Axis Live Tool Holder BMT65, ER-32 (non-coolant thru)
• O.D. Holder (1”)
• Boring Bar Holder (2”)

• Sleeves

• Boring Bar Sleeve Set 2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 3000BM – BOX WAY – (12″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1")
• U-Drill Tool Holder (2")
• Boring Bar Holder (2”)
• O.D. Holder (1”)
• X-Axis Live Tool Holder BMT65, ER-32 (non-coolant thru)
• Z-Axis Live Tool Holder BMT65, ER-32 (non-coolant thru)

• Sleeves

• Boring Bar Sleeve Set 2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 3000BL – BOX WAY – (12″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #4
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Milling/Live Tool Turret
• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 3 Set of Hard Jaws
• 1 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1")
• U-Drill Tool Holder (2")
• Boring Bar Holder (2”)
• X-Axis Live Tool Holder BMT65, ER-32 (non-coolant thru)
• Z-Axis Live Tool Holder BMT65, ER-32 (non-coolant thru)

• Sleeves

• Boring Bar Sleeve Set 2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 3000B – BOX WAY – (12″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Milling/Live Tool Turret
• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1")
• U-Drill Tool Holder (2")
• Boring Bar Holder (2”)

• Sleeves

• Boring Bar Sleeve Set 2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 4000 – BOX WAY – (18″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #5
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Milling/Live Tool Turret
• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (2-1/2”)
• Boring Bar Holder (2-1/2”)

• Sleeves

• Boring Bar Sleeve Set 2-1/2”x(1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 4000L – BOX WAY

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #5
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD

• Machine Options

• Milling/Live Tool Turret
• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (2-1/2”)
• Boring Bar Holder (2-1/2”)

• Sleeves

• Boring Bar Sleeve Set 2-1/2”x(1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 5000M – BOX WAY – (21″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #5
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• 1 Set of Hard Jaws
• 3 Set of Soft Jaws
• 3 Color Tower Light

• Holders

• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (2-1/2”)
• X-Axis Live Tool Holder BMT75, ER-40 (non-coolant thru)
• Z-Axis Live Tool Holder BMT75, ER-40 (non-coolant thru)
• Boring Bar Holder (2-1/2”)
• O.D. Holder (1-1/4”)

• Sleeves

• Boring Bar Sleeve Set 2-1/2”x(1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 4000M – BOX WAY – (18″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #5
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training

• Holders

• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (2-1/2”)
• X-Axis Live Tool Holder BMT75, ER-40 (non-coolant thru)
• Z-Axis Live Tool Holder BMT75, ER-40 (non-coolant thru)
• Boring Bar Holder (2-1/2”)
• O.D. Holder (1-1/4”)

• Sleeves

• Boring Bar Sleeve Set 2-1/2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 4000LM – BOX WAY (18″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #5
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training

• Holders

• Face Tool Holder (1-1/4”)
• U-Drill Tool Holder (2-1/2”)
• X-Axis Live Tool Holder BMT75, ER-40 (non-coolant thru)
• Z-Axis Live Tool Holder BMT75, ER-40 (non-coolant thru)
• Boring Bar Holder (2-1/2”)
• O.D. Holder (1-1/4”)

• Sleeves

• Boring Bar Sleeve Set 2-1/2”x(3/8’”, 1/2”, 5/8”, 3/4”, 1”, 1-1/4”, 1-1/2”)

• Back Plate

• Block, Clamp & Wedge

SMART NL 5000LM – BOX WAY – (21″ CHUCK)

• Tool Presetter
  STANDARD
• Oil Skimmer
  STANDARD
• Programmable Tailstock (Body & Quill)
  STANDARD
• Built-in Tailstock Bearings MT #5
  STANDARD
• Barfeeder Interface
  STANDARD
• Manual Guide i
  STANDARD
• (1) X-Axis Live Tool Holder
  STANDARD
• (1) Z-Axis Live Tool Holder
  STANDARD

• Machine Options

• Chip Conveyor - Side Discharge
• 140 PSI Coolant Pump, Replaces Standard Pump
• 290 PSI Coolant Pump, Replaces Standard Pump
• Manual Guide i Training
• Hydraulic Steady Rest Preparation Kit